Healthy battery guide V1 2

Healthy battery guide V1 2


                                       









Guide to a healthy and happy battery



Dear BlueNova Energy client, the following guide will assist you to maintain your battery in a healthy manner and to prevent unnecessary maintenance on your system.


Directions


  1. Please charge battery at least every 3rd day to 100% SOC.
  2. Make sure on the battery OLED display the pack voltage is above 56.1v.


  1. Confirm that all the cells are above 3.5V but not higher that 3.65v.

      


  1. All cells must be balanced (voltage range close to each other).











Setpoints for voltage-based setup:


For installations that exclude serial/CAN communication, set the following values:



13V

26V

39V

52V

V(high set) / Bulk / Absorb

14.1V

28.1V

42.1V

56.2V

V(float)

13.9V

27.8V

41.6V

55.5V

V(reconnect)

12.8V

25.6V

38.4V

51.2V

V(low set)

12.0V

24.0V

36.0V

48V


Notes:


  1. If you have a cell with a voltage that is lower that the rest of your cell can lead to lost in capacity or Vcell low errors.
  2. If you do not reach the healthy battery recommended settings please contact your installer.

Support:


For any technical assistance, please log a ticket on our support system.

https://www.bluenova.co.za/contact-us/support/



Supporting materials:


Supporting documents, latest firmware, and manuals can be found on our website under the knowledge base.(BlueNova-contact us-support-login-knowledgebase)

https://desk.zoho.com/portal/bluenova/home


Contact information:


BlueNova Technical Support +27(0)21 205 2000 / support@bluenova.co.za

We value your feedback! For suggestions on how we can improve our products

and services, please email BlueNova Customer Care at feedback@bluenova.co.za



    • Related Articles

    • MPS battery guide

      This guide will guide you on how to use your MPS battery. Remember to look at the battery specifications before you buy the battery. Make sure that your charger voltages can be set to the voltage points recommended for MPS batteries. If you use these ...
    • SMA RJ-45 Pin out Guide

      The attached image will show you how to connect your cable for SMA inverters. Pin out Guide
    • Unboxing 40kw 52V BlueNova Battery

      Welcome to the introduction of 40kw 52v Blue Nova battery and please watch our video attached. Video Link Unboxing 40kw of power
    • Bluetooth monitored 13V - 1.3kWh Lithium battery

      Welcome to the introduction of our Bluetooth monitored 13V - 1.3kWh Lithium battery Video Link Bluetooth monitored 13V - 1.3kWh Lithium battery
    • Voltronix/Axpert Equalization Settings To achieve regular 100% SOC on battery

      Please see the recommended BlueNova Setup guide for your 26V and 48V expert inverter. These settings will help you achieve balanced cell and full capacity with a 100% SOC If you need any assistance further on setting up your inverter please contact ...